dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Interior Moulding / Trim|Service and Repair > < Carpet - Removal|Page 6786
Page 1
background image

Console: Description and Operation

DESCRIPTION

NOTE: The Compass Mini-Trip Computer (CMTC) is sometimes referred to as the Electronic Overhead Modules (EOM) for the purposes of

scan tool and diagnostic information naming. Please treat the CMTC and EOM as one and the same when diagnosing the vehicle.

NOTE: The overhead console reading lamp switches, bulb holders and wiring harness are serviced only as a unit and are not available

individually for service.

An overhead console (1) is available on this vehicle and includes the following components:

-

Front map/reading lamps (2)

-

A vacuum-fluorescent display screen (4) - if equipped with CMTC

-

HomeLink(R) transceiver (3) - if equipped

-

CMTC Module - if equipped

-

Power Sunroof Switch - if equipped

The overhead console assembly is mounted by two snap clips and a screw securing it to a molded plastic retainer bracket located above the headliner.
The CMTC module is accessed by removing the overhead console from the bracket and pulling it away from the headliner. The CMTC module consist
of the vacuum-fluorescent display screen, HomeLink(R) transceiver and four function buttons. The individual components of the CMTC module are not
serviced separately and if damaged or inoperative, must be replaced as a unit.

For additional information on the CMTC module and system, See: Instrument Panel, Gauges and Warning Indicators/Compass/Description and
Operation/Compass and Mini-Trip Computer Module - Description.

Interior Moulding / Trim|Service and Repair > < Carpet - Removal|Page 6786