Dakota 4WD V8-4.7L (2009)
17. Install the upper door striker trim covers (3) as follows:
-
Position the trim cover (3) to the headliner (2) opening around the door striker and engage the retaining tabs that secure the cover to the roof
rail.
18. Install the front seat headrests.
19. Seat the top of each of door seal to the door opening.
Quad Cab
CAUTION: Be careful not to crease the headliner.
1. Position the headliner in the vehicle through the left door opening.
2. Connect the headliner wire harness connector (1) to the center high mounted stop lamp.
3. Raise the rear of the headliner (7) to the roof panel and install the two coat hooks, See: Trim Panel/Service and Repair/Coat Hook - Installation.
4. Raise the front of the headliner to the roof panel and install the sun visor supports (3), See: Sun Visor/Service and Repair/Visor - Installation.
5. Install the left front seat, See: Seats/Service and Repair/Seat, Front/Seat - Installation.
6. Install the right front seat headrest.
7. Connect the wire harness connector (5) located at the right A-pillar.
8. If equipped, connect the headliner wire harness connector (2) to the inside rear view mirror.
9. If equipped, install the overhead console, See: Console/Service and Repair/Overhead Console - Installation.
10. Install the sun visors (4), See: Sun Visor/Service and Repair/Visor - Installation.
11. If equipped, install the front dome lamp, See: Lighting and Horns/Dome Lamp/Dome Lamp Bulb/Service and Repair/Dome Lamp - Installation.
12. Install the A-pillar trim panels, See: Trim Panel/Service and Repair/Pillar Trim/A-Pillar Trim Panel-Installation.
13. If equipped, install the rear dome lamp, See: Lighting and Horns/Dome Lamp/Dome Lamp Bulb/Service and Repair/Dome Lamp - Installation.
