Dakota 4WD V8-4.7L (2009)
Electronic Brake Control Module: Procedures
REPLACING THE ANTI-LOCK BRAKE MODULE
REPLACING THE ANTI-LOCK BRAKE MODULE
NOTE: Failure to properly program the ABS module will result in an illuminated or blinking ABS indicator.
1. Turn the ignition off.
2. Replace the Anti-lock Brake Module.
3. With the scan tool, perform the module configuration procedures as necessary.
4. Road test the vehicle above 40 m.p.h. for at least two minutes.
5. With the scan tool, select View DTCs in the Anti-lock Brake Module.
Are there any DTCs present?
Yes
-
Perform the appropriate diagnostic procedure(s).
No
-
Test Complete
-
Perform the ABS VERIFICATION TEST See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Diagnostic
Trouble Code Tests and Associated Procedures/Verification Tests/ABS Verification Test.
