Dakota 4WD V8-4.7L (2009)
Backing Plate: Service and Repair
Brake Backing Plate - Removal
REMOVAL
1. Remove wheel and tire assembly and brake drum.
2. Remove the parking brake cable (2) from the parking brake lever (1) in the rear of the support plate. . See: Parking Brake System/Parking Brake
Cable/Service and Repair/Removal/Rear Cable
3. Disconnect the brake line (4) at the wheel cylinder (2).
4. Remove the wheel cylinder (2) from the support plate (1). See: Wheel Cylinder/Service and Repair/Removal.
5. Remove the axle shaft, See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft Assembly/Axle Shaft/Service and
Repair/Rear Axle - 9 1/4/Removal.
