Dakota 4WD V8-4.7L (2009)
Brake Shoe: Service and Repair
Installation
REAR SHOES
1. Clean and inspect individual brake components.
2. Lubricate where the brake shoe contacts the support plate with high temperature grease or Lubriplate.
3. Lubricate adjuster screw socket, nut, button and screw thread surfaces with grease or Lubriplate.
4. Install parking brake lever (2) to the rear shoe (7) and install the hold down clip (6).
5. Install the adjuster strut (5) onto the shoes and park brake lever (2).
6. Install the front shoe (8) on support plate (9), and install the hold down clip (6).
7. Install the adjuster spring and lever (4) in the slot in the adjuster strut (7).
8. Install the lower return spring (1) to the shoes (3).
