Dakota 4WD V8-4.7L (2009)
Camshaft - Right
REMOVAL
1. Remove the cylinder head cover(s) (1)See: Cylinder Head Assembly/Valve Cover/Service and Repair/Removal and Replacement/Cylinder Head
Cover(s) - Removal.
CAUTION: When the timing chain is removed and the cylinder heads are still installed, DO NOT forcefully rotate the camshafts or crankshaft
independently of each other. Severe valve and/or piston damage can occur.
2. Set engine to TDC cylinder #1, camshaft sprocket V8 marks at the 12 o'clock position.
3. Mark the link on the secondary timing chain that is aligned with two dots on the cam sprocket as shown to aid in installation.
