Dakota 4WD V8-4.7L (2009)
CAUTION: Care should be taken not to damage the camshaft target wheel. Do not hold the target wheel while loosening or tightening the
camshaft sprocket. Do not place the target wheel near a magnetic source of any kind. A damaged or magnetized target wheel could
cause a vehicle no start condition.
CAUTION: Do not forcefully rotate the camshafts or crankshaft independently of each other. Damaging intake valve to piston contact will
occur. Ensure the negative battery cable is disconnected and isolated to guard against accidental starter engagement.
13. Use Spanner Wrench 6958 (2) with Adapter Pins 8346 and remove left and right camshaft sprocket bolts.
14. While holding the left camshaft with Camshaft Holder 8428A (1), remove the left camshaft sprocket (3). Slowly rotate the camshaft approximately
15 degrees clockwise to a neutral position.
15. While holding the right camshaft with Camshaft Holder 8428A (1), remove the right camshaft sprocket (2). Slowly rotate the camshaft
