Dakota 4WD V8-4.7L (2009)
Control Assembly: Service and Repair
A/C and Heater Control - Installation
INSTALLATION
1. Position the A/C-heater control (1) into the instrument panel center bezel.
2. Install the screws (2) that secure the A/C-heater control to the center bezel. Tighten the screws to 2 Nm (17 in. lbs.).
3. Connect the wire harness connectors (3 and 4), to the back of the A/C-heater control and install the instrument panel center bezel See: Body and
Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Panel - Installation.
4. Reconnect the negative battery cable.
5. Initiate the Actuator Calibration function using a scan tool See: Testing and Inspection/Component Tests and General Diagnostics/HVAC System
Test.