Dakota 4WD V8-4.7L (2009)
Accelerator Pedal: Service and Repair
Removal
REMOVAL
The accelerator pedal is serviced as a complete assembly (8) including the bracket.
The accelerator cable (4) is connected to the upper part of the accelerator pedal arm by a plastic retainer (clip) (2). This plastic retainer snaps into the
top of the accelerator pedal arm.
1. From inside the vehicle, hold up accelerator pedal. Remove plastic cable retainer (clip) (2) and throttle cable core wire from upper end of
accelerator pedal arm. Plastic cable retainer (clip) snaps into pedal arm.
2. Remove two accelerator pedal mounting bracket nuts (7). Remove accelerator pedal assembly (8).
