Dakota 4WD V8-4.7L (2009)
1. Depending on which coil assembly is being removed, the throttle body air intake tube or intake box may need to be removed, to gain access to the
coil.
2. Disconnect the electrical connector (2) from the coil assembly by pushing downward on the release lock on the top of the connector and pull
connector from the coil.
3. Disconnect the secondary cable (3) at the coil assembly.
4. Clean the area at the base of the coil assembly with compressed air before removal.
5. Remove the coil assembly mounting bolt (3).
6. Carefully pull up the coil assembly (2) from the cylinder head opening with a slight twisting action. This helps to disengage the rubber boot (4)
from the spark plug (5).
7. Remove the coil assembly from the engine.