Dakota 4WD V8-4.7L (2009)
5. Loosen and move the lower trim (3) away from the inside of the C-pillar far enough to access the lower seat belt anchor. See: Body and
Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar Trim/C-Pillar Trim Panel-Removal.
6. Remove the screw (8) that secures the lower anchor near the base of the inner C-pillar.
7. Disengage the seat belt, lower anchor, latch plate (7) and turning loop from the clearance holes in the lower C-pillar trim and set the lower C-pillar
trim aside.
8. Remove the screw (3) that secures the retractor (2) to the inner C-pillar (1).
9. Lift the retractor upward far enough to disengage the tab on the back of the retractor from the T-slot in the inner C-pillar.
10. Remove the rear seat belt and retractor from the vehicle as a unit.
