Dakota 4WD V8-4.7L (2009)
Battery Tray: Service and Repair
Battery Tray - Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the battery, See: Service and Repair/Removal and Replacement/Battery - Removal.
3. Remove the Integrated Power Module (IPM) (1), See: Power and Ground Distribution/Power Distribution Module/Service and Repair/Integrated
Power Module (IPM) - Removal.
4. Remove the Antilock Brake System (ABS) Hydraulic Control Unit (HCU) (3) bolts (2) from the battery tray (1).
