Dakota 4WD V8-4.7L (2009)
Control Arm Bushing: Service and Repair
Front Lower Control Arm Shock Bushing - Removal
LOWER CONTROL ARM SHOCK BUSHING
1. Remove the shock See: Suspension Strut / Shock Absorber/Service and Repair/Front Strut / Shock/Removal.
NOTE: Extreme pressure lubrication must be used on the threaded portions of the tool. This will increase the longevity of the tool and insure
proper operation during the removal and installation process.
2. Install special tools to press the bushing (3) out of the lower control arm (4) using special tools C-4212F (Press) (1), 9653-1 (driver) (4) and
9653-2 (Receiver) (5).