Dakota 4WD V8-4.7L (2009)
2. Secure the control arm in a vise (7).
NOTE: Extreme pressure lubrication must be used on the threaded portions of the tool. This will increase the longevity of the tool and insure
proper operation during the removal and installation process.
3. Install special tools C-4212F (press) (6), 6761(Receiver) (1), 9601-2 (Reaction Plate) (2), 9601-1 (Driver) (5) to press the bushing (3) out of the
upper control arm (4).
Front Upper Control Arm Bushings - Installation
UPPER CONTROL ARM BUSHING
1. Install the new bushing (2) into the lower control (3) arm using tools C-4212F (Press) (5), 9601-3 (Depth Gauge) (4), 9601-4 (Driver) (1).
2. Remove the control arm from the vise (6).
