Dakota 4WD V8-4.7L (2009)
6. Install the tie rod end (2) and tighten the nut (1) to 108 Nm (80 ft. lbs.).
7. Install the front halfshaft (2) into the hub/bearing 4X4 only.
8. Install the the halfshaft nut and tighten to 251 Nm (185 ft. lbs.) 4X4 only.
9. Install the ABS wheel speed sensor if equipped See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Wheel Speed
Sensor/Service and Repair/Wheel Speed Sensor - Installation/Front and brake shield, rotor and caliper See: Brakes and Traction Control/Disc
Brake System/Brake Rotor/Disc/Service and Repair/Removal and Replacement/Brake Rotor - Installation.
10. Install the wheel and tire assembly See: Wheels and Tires/Service and Repair/Removal and Replacement.
11. Remove the support and lower the vehicle.
12. Perform a wheel alignment See: Alignment/Service and Repair.