Dakota 4WD V8-4.7L (2009)
Transfer Case Actuator: Service and Repair
NV233 Transfer Case
Shift Motor with Mode Sensor - Removal
REMOVAL
NOTE: New shift motor assemblies are shipped in the 2WD/AWD position. If a new shift motor assembly must be installed, it will be
necessary to shift the transfer case to the 2WD/AWD position prior to motor installation.
1. Raise the vehicle on a suitable hoist.
2. Disengage the wiring connector from the shift motor and mode sensor assembly.
3. Remove the bolts (3) holding the shift motor and mode sensor assembly (2) onto the transfer case (1).
4. Separate the shift motor and mode sensor assembly (2) from the transfer case (1).
Shift Motor with Mode Sensor - Installation
INSTALLATION
