Dakota 4WD V8-4.7L (2009)
Check Valve: Service and Repair
Washer Check Valve - Installation
INSTALLATION
1. Position the check valve (2) to the underside of the cowl plenum cover/grille panel (4). Be certain that the flow direction arrow molded into the
check valve body is oriented towards the washer nozzles.
2. From the underside of the cowl plenum cover/grille panel, reconnect the cowl plenum (1) and washer nozzle (3) hoses to the three barbed nipples
of the check valve.
3. Reinstall the cowl plenum cover/grille panel over the cowl plenum. See: Body and Frame/Cowl/Cowl Moulding / Trim/Service and Repair/Cowl
Panel Cover - Installation.
4. Close and latch the hood.
5. Reinstall both wiper arms onto the wiper pivots. See: Wiper Arm/Service and Repair/Wiper Arm - Installation.