Dakota 4WD V8-4.7L Flex Fuel (2008)
Towing Information: Service and Repair
Four Wheel Drive Towing
FOUR WHEEL DRIVE TOWING
Chrysler Corporation recommends that a vehicle be transported on a flat-bed device. A Wheel-lift device can be used provided all the wheels are lifted
off the ground using tow dollies.
WARNING: When towing a disabled vehicle and the drive wheels are secured in a wheel lift or tow dollies, ensure the transmission is in the
park position.
CAUTION: Many vehicles are equipped with air dams, spoilers, and/or ground effect panels. To avoid component damage, a wheel-lift towing
vehicle or a flat-bed hauling vehicle is recommended.
FOUR WHEEL DRIVE TOWING - REAR END LIFTED
WARNING: Ensure vehicle is on a level surface or the wheels are blocked to prevent vehicle from rolling.
1. Attach wheel lift device to front wheels.
2. Place the transmission in neutral.
3. Raise the front of the vehicle off the ground and install tow dollies under front wheels.
4. Attach wheel lift device to rear wheels and raise vehicle to towing position.
5. Attach safety chains to frame rails. Route chains so not to interfere with tail pipe when vehicle is lifted.
6. Turn the ignition switch to the OFF position to unlock the steering wheel.
CAUTION: Do not use steering column lock to secure steering wheel during towing operation.
7. Secure steering wheel in straight ahead position with a clamp device designed for towing.
8. Place the transmission in park.
FOUR WHEEL DRIVE TOWING - FRONT END LIFTED
WARNING: Ensure vehicle is on a level surface or the wheels are blocked to prevent vehicle from rolling.
1. Attach wheel lift device to rear wheels.
2. Place the transmission in neutral.
3. Raise the rear of the vehicle off the ground and install tow dollies under rear wheels.
4. Attach wheel lift device to front wheels and raise vehicle to towing position.
5. Attach the safety chains.
CAUTION: Do not use steering column lock to secure steering wheel during towing operation.
6. Turn the ignition switch to the OFF position to unlock the steering wheel.
7. Secure steering wheel in straight ahead position with a clamp device designed for towing.
8. Place the transmission in park.
