Dakota 4WD V8-4.7L Flex Fuel (2008)
Front Bumper Reinforcement: Service and Repair
Front Fascia Support
Removal
REMOVAL
1. Remove the support bracket. See: Fascia Support Bracket/Removal
2. Remove the four nuts (1 and 3) securing the fascia support (4) to the frame tips (2).
3. Remove the support (4).
Installation
INSTALLATION
1. Install the fascia support (4) and install the right (1) and left (3) nuts.
2. Tighten the nuts to 95 Nm (70 ft. lbs.).
3. Install the fascia support bracket. See: Fascia Support Bracket/Installation
4. Check front fascia gap and flush positioning.
5. Loosen the nuts (1 and 3) and adjust the front fascia to specifications.
6. Tighten the nuts to 95 Nm (70 ft. lbs.).
