Dakota 4WD V8-4.7L Flex Fuel (2008)
3. Disconnect the upper cable (1) from the door handle (2).
4. Separate the push pin hangers (3) from the door and separate the cable.
5. Remove the four screws (1) and remove the latch assembly (2) from the door.
Installation
INSTALLATION
1. Install the latch assembly (2) and install the screws (1).
2. Tighten the screws to 12 Nm (105 in. lbs.).
3. Install the cable hanger push pins (3) and seat fully.
