Dakota 4WD V8-4.7L Flex Fuel (2008)
Console: Service and Repair
Overhead Console - Installation
OVERHEAD CONSOLE
1. Position the overhead console near the mounting location on the headliner.
2. Connect the reading lamp wire harness connector (2).
3. If equipped, connect the sunroof switch wire harness connector (1).
4. If equipped, connect the Compass Mini-Trip Computer (CMTC) module wire harness connector (3).
5. Align the snap clips on the overhead console housing with their receptacles (3) in the overhead console bracket.
6. Push upward firmly and evenly on the sides of the overhead console housing over the snap clip locations until the snap clips are fully engaged with
the receptacles in the overhead console bracket.
