dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Headliner - Removal|Page 8203 > < Headliner - Removal|Page 8201
Page 5
background image

9. Remove the sun visors (4), See: Sun Visor/Service and Repair/Sun Visor - Removal.

10. Remove the sun visor supports (3), See: Sun Visor/Service and Repair/Sun Visor Support - Removal.
11. If equipped, remove the front dome lamp, See: Lighting and Horns/Dome Lamp/Service and Repair/Dome Lamp - Removal.
12. If equipped, remove the rear dome lamp, See: Lighting and Horns/Dome Lamp/Service and Repair/Dome Lamp - Removal.
13. Remove the two coat hooks, See: Trim Panel/Service and Repair/Coat Hook - Removal.
14. Remove the front seat headrests.
15. Remove the cab back trim panel, See: Trim Panel/Service and Repair/Cab Back Trim Panel - Removal.
16. Remove the rear jumper seat headrests.
17. Remove the rear jumper seat headrest sleeves from the headliner.
18. Lower the rear of the headliner (7) and disconnect the headliner wire harness connector (1) from the center high mounted stop lamp.
19. Recline the front seats.

CAUTION: Be careful not to crease the headliner.

20. Lower the front of the headliner and remove the headliner through the door opening where the seat belt turning loop and height adjuster was

disconnected from the upper roof rail.

Quad Cab

1. Pull the top of each door seal downward slightly.

2. Remove the upper C-pillar trim panels, See: Trim Panel/Service and Repair/Pillar Trim/C-Pillar Trim Panel-Removal.

Headliner - Removal|Page 8203 > < Headliner - Removal|Page 8201