Dakota 4WD V8-4.7L Flex Fuel (2008)
Trim Panel: Service and Repair
Cab Back Trim Panel - Installation
INSTALLATION
Club Cab, Without Rear Jumper Seats
NOTE: Cab back trim panel with jumper seats shown. Trim panel without seats similar.
1. Position the cab back trim panel (1) in the vehicle.
2. Using hand pressure, engage the clips (2) that secure the cab back trim panel to the cab.
3. Install the lower C-pillar trim panels, See: Pillar Trim/C-Pillar Trim Panel-Installation.
4. Install the upper C-pillar trim panels, See: Pillar Trim/C-Pillar Trim Panel-Installation.
Club Cab, With Rear Jumper Seats
