Dakota 4WD V8-4.7L Flex Fuel (2008)
other and engage the snaps that secure the two halves together. Then, close the cover around the seat belt.
2. Using hand pressure, push the retractor cover (1) downward over the retractor (3) far enough to engage the two locator pins in the top of the
inboard cover half with the locator holes in the top of the retractor.
3. Install the two plastic push-pin retainers (2) that secure the retractor cover to the retractor.
Cowl Trim - Removal
REMOVAL
Club Cab
1. Remove the outer front seat belt retractor cover, See: Cover-Outer Front Seat Belt Retractor/Removal.
2. Using a trim stick C-4755 or equivalent, disengage the retaining tabs (2) that secure the door sill scuff plate end of the cowl trim panel to the
