Dakota 4WD V8-4.7L Flex Fuel (2008)
1. Using a small flat bladed tool or equivalent, carefully open the two fastener covers in the A-pillar trim panel (1).
2. Remove the two bolts (2) that secure the A-pillar trim panel to the A-pillar and remove the trim panel.
A-Pillar Trim Panel-Installation
INSTALLATION
1. Position the locating tabs (3) of the A-pillar trim panel into the slots located in the top of the instrument panel and install the trim panel (1) onto
the A-pillar.
2. Install the two bolts (2) that secure the A-pillar trim panel to the A-pillar. Tighten the bolts to 6 Nm (55 in. lbs.).
3. Close the two fastener covers in the A-pillar trim panel.
Removal
REMOVAL
