Dakota 4WD V8-4.7L Flex Fuel (2008)
1. Unsnap the trim cover (4) from the rear seat belt turning loop (3).
2. Remove the screw (5) that secures the seat belt turning loop to the upper C-pillar (1).
3. Remove the seat belt turning loop from the C-pillar.
4. Using a trim stick C-4755 or equivalent, disengage the retaining tabs that secure the upper C-pillar trim panel (2) to the C-pillar and then pull the
trim panel away from the C-pillar and remove the trim panel.
Lower
INSTALLATION
Club Cab, Without Rear Jumper Seats
1. Position the lower C-pillar trim panel (4) to the C-pillar and engage the retaining tabs that secure the trim panel to the C-pillar.
CAUTION: Keep the inner bottom end of the upper C-pillar trim panel away from the cab back trim panel when installing the upper
C-pillar trim panel to prevent scratching the back trim panel.
2. Install the upper C-pillar trim panel, See: Pillar Trim/C-Pillar Trim Panel-Installation.