dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Sunroof / Moonroof Panel|Adjustments|Page 8481 > < Sunroof / Moonroof Frame|Removal|Page 8477
Page 1
background image

Sunroof / Moonroof Panel: Adjustments

SUNROOF GLASS PANEL ADJUSTMENT

1. Move the sunshade rearward to the open position.
2. Move the sunroof glass panel to the fully closed position.
3. Disconnect the sight shield (2) and rotate out of the way to provide access to the glass panel screws (1).

4. Adjust the glass one corner at a time.

a. Loosen four glass screws (1).
b. Lift glass assembly and align the top of the glass panel to the top of the roof panel.
c. Tighten screw to 3.5 Nm (31 in. lbs.).
d. Repeat steps a. and b. for each corner of the glass panel.
e. When properly adjusted, the front of the glass panel is 1.75 mm (0.07 in.) to 2.75 mm (0.11 in.) lower than the roof surface and the rear edge

of the glass panel is 1.75 mm (0.07 in.) to.75 mm (0.03 in.) lower than the roof surface.

Sunroof / Moonroof Panel|Adjustments|Page 8481 > < Sunroof / Moonroof Frame|Removal|Page 8477