Dakota 4WD V8-4.7L Flex Fuel (2008)
Head Rest: Service and Repair
Headrest - Installation
INSTALLATION
1. Position the headrest (2) into the vehicle.
2. Insert the upper post into the grommet (1) and push up slightly on the headrest (2).
3. Install the fasteners (3) to secure the lower headrest to the cab back.
4. Tighten the fasteners to 12 Nm (9 ft. lbs.).
5. Install the cab back trim panel See: Interior Moulding / Trim/Trim Panel/Service and Repair/Cab Back Trim Panel - Installation.
6. Connect the battery negative cable.
