Dakota 4WD V8-4.7L Flex Fuel (2008)
Power Seat Switch: Service and Repair
Power Seat Switch - Installation
INSTALLATION
1. Install the two screws (3) that secure the power seat switch (2) to the inside of the seat cushion side shield (1).
2. Install the wire harness connector on the power seat switch assembly.
3. position the seat cushion side shield (2) and power seat switch assembly (1) onto the seat frame.
4. Install the seat cushion side shield screws (3) and (6).
5. Install the recliner lever (5) on the recliner mechanism release shaft.
6. Install the screw (4) that secures the recliner lever (5) to the recliner mechanism release shaft on the outboard side of the driver side front seat.
7. Connect the battery negative cable.
