dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Control Switch|Page 8663 > < Sunroof / Moonroof Switch|Description|Page 8660
Page 1
background image

Sunroof / Moonroof Switch: Service and Repair
Control Switch

Removal

REMOVAL

1. Disconnect and isolate the negative battery cable.
2. Remove the overhead console from the headliner See: Interior Moulding / Trim/Console/Service and Repair/Overhead Console - Removal.
3. Disconnect the sunroof control switch electrical connector. Depress the connector retaining tab and pull the connector straight out.
4. To remove the switch from the overhead console, push on the back of the switch until it comes free from the overhead console.

Installation

INSTALLATION

1. Install the switch in the overhead console assembly. Be certain the switch is securely snapped in place.
2. Connect the sunroof control switch electrical connector. Be certain the switch connector is securely snapped in place.
3. Install the overhead console See: Interior Moulding / Trim/Console/Service and Repair/Overhead Console - Installation.
4. Connect the negative battery cable.

Control Switch|Page 8663 > < Sunroof / Moonroof Switch|Description|Page 8660