Dakota 4WD V8-47L Flex Fuel (2008) Brake Rotor/Disc Service and Repair
Brake Rotor/Disc: Removal and Replacement
Brake Rotor - Removal
REMOVAL
1. Raise and support the vehicle.
2. Remove the wheel and tire assembly.
3. Remove the caliper (1) with the adaptor bolts (5) from the steering knuckle (4), See: Brake Caliper/Service and Repair/Removal and
Replacement/Disc Brake Caliper - Removal and remove caliper adapter assembly (1).
NOTE: Do not allow brake hose to support caliper adapter assembly (1).
4. Remove the rotor (2) from the hub/bearing (3).
Brake Rotor - Installation
INSTALLATION
1. Install the rotor (2) onto the hub/bearing (3).
2. Install the caliper adapter assembly (1),See: Brake Caliper/Service and Repair/Removal and Replacement/Disc Brake Caliper - Installation and
tighten adapter bolts (5) to 176 Nm (130 ft.lbs.).
3. Install the wheel and tire assembly, See: Maintenance/Wheels and Tires/Service and Repair/Removal and Replacement and lower the vehicle.
4. Apply the brakes several times to seat brake pads. Be sure to obtain firm pedal before moving vehicle.