Dakota 4WD V8-4.7L Flex Fuel (2008)
Backing Plate: Service and Repair
Installation
INSTALLATION
1. Install support plate (2) on axle flange. Tighten attaching nuts (1) to 68 Nm (55 ft. lbs.).
2. Install wheel cylinder (2). See: Wheel Cylinder/Service and Repair/Installation.
3. Install brake line (4) in wheel cylinder (2).
4. Reassemble the brake shoe assembly and insert the lever (1) into the support plate.
5. Install the park brake cable (2) to the lever (1).
6. Install axle shaft, See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft Assembly/Axle Shaft/Service and Repair/Rear