Dakota 4WD V8-4.7L Flex Fuel (2008)
CAUTION: Dirt, oil, and solvents can damage caliper seals. Insure assembly area is clean and dry.
1. Lubricate caliper pistons, piston seals and piston bores with clean, fresh brake fluid.
NOTE: Verify seal is fully seated and not twisted.
2. Install new piston seals (2) into caliper bores (1).
3. Leave boot (1) dry and slip onto end of piston (2).
NOTE: The dust boot lip must be inserted before the piston
4. Slightly pull out lip portion of piston boot (3) so it protrudes past the bottom of the piston (2) and work lip into outermost groove on caliper
housing (1).
