Dakota 4WD V8-4.7L Flex Fuel (2008)
Brake Hose/Line: Removal and Replacement
Rear Brake Lines - Brake Hose At Axle To Wheel Cylinders
REAR BRAKE LINES - BRAKE HOSE AT AXLE TO WHEEL CYLINDERS
1. Raise and support the vehicle.
NOTE: If brake line (3) is being replaced
2. Remove the brake line (3) from the brake hose (2) at the axle.
3. Remove the brake line from the clip on the spring bracket.
4. Remove the other end of the line (1) at the wheel cylinder (2).
