Dakota 4WD V8-4.7L Flex Fuel (2008)
5. Lower the vehicle and remove the support.
6. Bleed the brake system See: Brake Bleeding.
Front Caliper Hose
FRONT CALIPER HOSE
1. Install the brake hose (6) in position.
2. Install the mounting bracket bolt (3) at the frame, tighten to 14 Nm (125 in.lbs).
3. Install the brake line (1) into the junction block (2) and tighten to 14 Nm (125 in.lbs) If removed.
4. Install the brake line (1) into the brake hose (6) and tighten to 14 Nm (125 in.lbs).
5. Install the brake hose banjo bolt (4) Use new copper washers (5) at the caliper and tighten to 28 Nm (250 in.lbs).
6. Remove the support and lower the vehicle.
7. Bleed the brake system See: Brake Bleeding.
