Dakota 4WD V8-4.7L Flex Fuel (2008)
Hydraulic System Junction Block: Service and Repair
Installation
INSTALLATION
1. Position the junction block (4) and install the mounting bolt. Tighten the mounting bolt to 14 Nm (125 in. lbs.).
2. Install the brake lines into the top of the junction block (4) and tighten to 14 Nm (125 in. lbs.).
3. Install the brake lines (1) into the side of the junction block (2) and tighten to 14 Nm (125 in. lbs.).
4. Bleed the base brake system, See: Brake Bleeding.
