Dakota 4WD V8-4.7L Flex Fuel (2008)
Vacuum Brake Booster: Service and Repair
Power Brake Booster - Installation
INSTALLATION
1. Position spacer and gaskets on booster studs.
2. Guide booster studs (4) into cowl panel holes and seat booster (3) on panel.
3. Install and tighten booster attaching nuts (4) to 28 Nm (250 in. lbs.).
4. Install booster push rod (3) on brake pedal and install clip (1). See: Brake Pedal Assy/Service and Repair/Installation.
