Dakota 4WD V8-4.7L Flex Fuel (2008)
10. Disconnect the power steering cooler lines (2).
11. Remove the lower radiator hose.
12. Lower vehicle.
13. Remove upper radiator mounting bolts.
14. Remove radiator.
15. Remove power steering fluid oil cooler from the radiator, if necessary.
16. Remove A/C condenser from radiator.
Radiator - Installation
INSTALLATION
The radiator has two isolator pins on bottom of both tanks. These fit into alignment holes in radiator lower support.
1. Install A/C condenser, if removed.
2. Install power steering cooler, if removed.
3. Install transmission oil cooler if removed.
4. Install the upper radiator mount
5. Position isolator pins into alignment holes in radiator lower support.
6. Install upper radiator support. Tighten bolts to 23 Nm (200 in. lbs.)
7. Install LH and RH radiator side seals.
8. Install upper radiator hose.
9. Install overflow tube.
10. Install radiator shroud.
