Dakota 4WD V8-4.7L Flex Fuel (2008)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
Vibration Damper - Removal
REMOVAL
1. Disconnect negative cable from battery.
2. Remove accessory drive belt See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Removal and
Replacement/Accessory Drive Belt - Removal.
3. Drain cooling system See: Cooling System/Service and Repair.
4. Remove radiator upper hose.
5. Remove upper fan shroud.
6. Using Special Tools 6958 Spanner with Adapter Pins 8346 (1), loosen fan and viscous assembly from water pump.
7. Remove fan and viscous assembly.
8. Disconnect electrical connector for fan mounted inside radiator shroud.
NOTE: Transmission cooler line snaps into shroud lower right hand corner.
9. Remove vibration damper bolt.
10. Remove damper using Special Tools 8513 Insert and 1026 Three Jaw Puller (2).
