Dakota 4WD V8-4.7L Flex Fuel (2008)
Valve Spring: Service and Repair
Valve Springs - Installation
INSTALLATION
1. Coat the valve stem with clean engine oil and install the valve stem seal. Make sure the seal is fully seated and that the garter spring at the top of
the seal is intact.
2. Install the spring (6) and the spring retainer (2).
3. Using Valve Spring Compressor 10102, compress the spring and install the two valve spring retainer halves.
4. Release the valve spring compressor and make sure the two spring retainer halves and the spring retainer are fully seated.
5. Position the hydraulic lash adjusters and rocker arms.
6. Install the cylinder head cover See: Valve Cover/Service and Repair/Removal and Replacement/Cylinder Head Cover - Installation.
7. Install spark plugs and plug wires.
