Dakota 4WD V8-4.7L Flex Fuel (2008)
Intake Manifold: Specifications
INTAKE MANIFOLD TORQUE AND SEQUENCE
Install the ignition coils (1,2) and manifold retaining bolts and torque from the center bolts, moving front to back in a crisscross pattern to 12 Nm (106
in. lbs.).
THROTTLE BODY TORQUE AND SEQUENCE
CAUTION: The throttle body mounting bolts MUST be torqued to specifications. DO NOT OVER TIGHTEN MOUNTING BOLTS. Over
tightening can cause damage to the throttle body, throttle plate, gaskets, bolts and/or the intake manifold. Proper torque of the mounting bolts
is critical to normal operation.
Obtain a torque wrench. Tighten mounting bolts (as shown) in a mandatory torque crisscross-cross pattern sequence to 7.5 Nm (65 in. lbs.).
