dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Defroster Ducts - Removal|Page 6667 > < Blend Door Actuator - Removal|Page 6662
Page 1
background image

Air Duct: Service and Repair
Defroster Ducts - Removal

REMOVAL

WARNING: On vehicles equipped with airbags, disable the airbag system before attempting any steering wheel, steering column, or instrument
panel component diagnosis or service.  Disconnect and isolate the battery negative (ground) cable, then wait two minutes for the airbag system
capacitor to discharge before performing further diagnosis or service. This is the only sure way to disable the airbag system. Failure to take the
proper precautions could result in accidental airbag deployment and possible personal injury or death.

NOTE: Take the proper precautions to protect the front face of the instrument panel from cosmetic damage during this service procedure.

1. Remove the instrument panel and place it on a workbench See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service

and Repair/Instrument Panel - Removal.

2. Remove the screws (1) that secure the defroster duct (2) to the instrument panel (3) and remove the duct.

Defroster Ducts - Removal|Page 6667 > < Blend Door Actuator - Removal|Page 6662