Dakota 4WD V8-4.7L Flex Fuel (2008)
NOTE: Illustration shown with HVAC housing removed for clarity.
1. Remove the screws (1) that secure the floor distribution duct (2) to the bottom of the HVAC housing (3).
2. Remove the floor distribution duct from the HVAC housing.
Floor Ducts - Installation
INSTALLATION
NOTE: Illustration shown with HVAC housing removed for clarity.
1. Position the floor distribution duct (2) onto the bottom of the HVAC housing (3).
2. Install the screws (1) that secure the floor distribution duct to the HVAC housing. Tighten the screws to 2 Nm (17 in. lbs.).
Instrument Panel Ducts - Removal
REMOVAL
WARNING: On vehicles equipped with airbags, disable the airbag system before attempting any steering wheel, steering column, or instrument
panel component diagnosis or service. Disconnect and isolate the battery negative (ground) cable, then wait two minutes for the airbag system
capacitor to discharge before performing further diagnosis or service. This is the only sure way to disable the airbag system. Failure to take the
proper precautions could result in accidental airbag deployment and possible personal injury or death.
NOTE: Take the proper precautions to protect the front face of the instrument panel from cosmetic damage during this service procedure.
