Dakota 4WD V8-4.7L Flex Fuel (2008)
Evaporator Temperature Sensor / Switch: Service and Repair
Installation
INSTALLATION
1. Install the evaporator temperature sensor (2) into the opening in the HVAC housing (3) near the blend door actuator (4).
2. Connect the HVAC wire harness connector (1) to the evaporator temperature sensor.
3. Install the instrument panel assembly See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument
Panel - Installation.
4. Reconnect the negative battery cable.
