Dakota 4WD V8-4.7L Flex Fuel (2008)
12. Remove the four screws (1) that secure the air inlet housing (2) to the top of the HVAC housing (3) and remove the air inlet housing.
NOTE: If the foam seal on the air inlet housing is deformed or damaged, it must be replaced.
13. If required, disassemble the air inlet housing See: Disassembly.
NOTE: If the foam seal on the panel/defrost outlet is deformed or damaged, it must be replaced.
14. Remove the foam seal (1) from the panel/defrost outlet (2) located on the top of the HVAC housing (3).
15. Remove the six screws (1) that secure the panel/defrost outlet (2) to the top of the HVAC housing (3) and remove the outlet.
