Dakota 4WD V8-4.7L Flex Fuel (2008)
Parking Light Bulb: Service and Repair
Removal
BULB - PARK/TURN SIGNAL/SIDE MARKER
1. Disconnect and isolate the battery negative cable.
2. Remove the front lamp unit (1) from the front fender. See: Service and Repair/Removal and Replacement/Front Lamp Unit - Removal.
3. Firmly grasp the park/turn signal/side marker bulb socket (3) on the back of the front lamp unit housing and rotate it counterclockwise about 30
degrees to unlock it.
4. Pull the socket and bulb straight out from the keyed opening in the housing.
5. Pull the base of the bulb straight out of the socket.
