Dakota 4WD V8-4.7L Flex Fuel (2008)
Wheel Fastener: Service and Repair
Studs - Removal
REMOVAL
FRONT WHEEL STUDS
1. Raise and support the vehicle.
2. Remove the wheel and tire assembly.
3. Remove the brake caliper, caliper adapter and rotor, See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and
Repair/Removal and Replacement/Brake Rotor - Removal.
4. Remove the wheel speed sensor from the hub.
5. Press the stud (2) from the hub using special tool C-4150A (1).
REAR WHEEL STUDS
1. Remove the wheel and tire assembly.
2. Remove the brake drum.
3. Press the stud (2) from the hub using special tool C-4150A (1).