Dakota 4WD V8-4.7L Flex Fuel (2008)
5. In the Manage Files screen, highlight the downloaded flash file and select "Copy to SM Device". A green checkmark should now appear
in the On SM Device column.
6. Exit the StarMOBILE« Desktop Client application.
7. Open the hood of the vehicle and install a battery charger. Verify that the charging rate provides a continuous charge of 13.2 - 13.5 volts.
8. Connect the StarMOBILE to the vehicle data link connector located under the steering column and turn the ignition key to the "RUN"
position.
9. On the StarMOBILE device, select "Enter Standalone Diagnostic Mode" (use the right function key).
NOTE: If a StarMOBILE« Desktop Client is still associated with the device, you will receive the following error: "Your StarMOBILE«
device is currently locked by a pc named 'xxxxxxxx' on your network. To remove the lock, close its Desktop Client or reboot this
device".
10. Program the ECU as follows:
a. Select "ECU View"
b. Select "PCM"
c. Select "Flash ECU"
