Dakota 4WD V8-4.7L Flex Fuel (2008)
Evaporative Emission Control Canister: Service and Repair
Vapor Canister - Installation
Installation - Club Cab
INSTALLATION - CLUB CAB
1. Guide the two plastic canister locating legs into the top of fuel tank.
2. Install pin (6) and press down.
3. Install electrical connector ESIM switch.
4. Install all vapor hoses and lines to both the EVAP canister and ESIM switch.
5. The vapor/vacuum lines and hoses must be firmly connected. Also check the vapor/vacuum lines at the ESIM switch, filter and EVAP
canister purge solenoid for damage or leaks. If a leak is present, a Diagnostic Trouble Code (DTC) may be set.
6. Install plastic shield in front of left-rear tire.
7. Install left-rear tire.
Installation - 4 Door Quad Cab
INSTALLATION - 4 DOOR QUAD CAB
1. Guide the two plastic canister locating legs into the top of fuel tank.
2. Install pin (6) and press down.
3. Raise fuel tank.
4. Install electrical connector ESIM switch.
5. Install all vapor hoses and lines to both the EVAP canister and ESIM switch.
6. The vapor/vacuum lines and hoses must be firmly connected. Also check the vapor/vacuum lines at the ESIM switch, filter and EVAP
canister purge solenoid for damage or leaks. If a leak is present, a Diagnostic Trouble Code (DTC) may be set.
7. Install fuel tank.