dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

EGR Valve > < EGR Valve - Removal|Page 3264
Page 2
background image

9. Do a final tightening of two EGR tube bolts (4). Torque to 11 Nm (8.5 ft. lbs.).

10. Install EVAP solenoid (2). See: Evaporative Emissions System/Canister Purge Solenoid/Service and Repair
11. Connect negative battery cable.
12. Using a diagnostic scan tool, erase any previously recorded DTC's (Diagnostic Trouble Codes).

EGR Valve > < EGR Valve - Removal|Page 3264